Penguin Chillers 1 HP High Efficiency (HE) Water Chiller in White 

The Penguin Chillers 1 HP High Efficiency (HE) Water Chiller delivers precision cooling to your setup, focusing on performance and versatile installation. Built with a titanium heat exchanger to prevent copper contact with water, the unit is designed for applications that require clean, controlled water temperatures.

Key Features

• Titanium heat exchanger

  Provides a non-copper cooling surface to enhance water purity.

• High efficiency design

  Offers enhanced heat-transfer area while maintaining standard compressor power draw. 

• Compact footprint

  Measures approximately 19.25″ W × 19.75″ D × 14.25″ H and weighs about 60 lb.

• Clear temperature range

  Recommended ambient temperatures from ~40 °F to 100 °F and designed to support low water temperatures under proper conditions.

Console & Programs

• Smart Digital Controller

  This controller keeps a constant eye on incoming water temperature and activates the compressor and fan when needed. Once your set temperature is reached, it powers down—keeping things efficient and consistent

User Interface & Experience

Mount the unit on a stable surface, connect it to the supplied inlet/outlet ports, and plug it into a standard 110/120 V outlet. The controller monitors incoming water temperature and activates cooling as needed—once the target is reached, it cycles off. The compact size and simple access make service or placement in tight spaces easier. The titanium exchanger gives confidence that water remains isolated from copper surfaces. The HE model adds improved efficiency so you get higher cooling capacity in a similar footprint. 

Penguin Chillers 1 HP Water Chiller

Integrated Digital Temperature Controller

Pre-installed inlet/outlet plumbing fittings

Power cord and mounting-ready housing with ventilation

Cooling Capacity: 11,500 BTU/hr

Electrical: 110–120 V | 7.2 A | ~830 W

Noise Level: ~59 dBA

Dimensions: 19.25″ × 19.75″ × 14.25″

Weight: ~60 lb (HE)

Ports: 1″ Bypass (female-threaded PVC)

Where should I install it?
This model is built for indoor use. Leave clearance—at least 6″ on sides/top and 12″ behind—for proper ventilation.

Is a separate pump required?
Yes. The chiller does not include a pump. You will need to match the flow rate and pressure requirements of your system for effective performance.

Can it reach very low water temperatures?
Under ideal conditions (ambient and system insulation) the HE model is designed to support water temperatures down into the high 30 °F range. Actual results depend on setup, ambient, insulation, and water volume.

Penguin Chillers

All Penguin Chillers include a minimum 1-year limited warranty.

Certain models may qualify for an optional extended warranty (up to 2 or 3 years total) depending on the purchase.

Coverage begins on the original date of purchase.